Montage Foam 750g

By prakash.avs

Montage Foam 750g

Description:

Selsil Montage Foam 750g is a one component, polyurethane-based filling and insulation material cured by atmospheric moisture.

Properties

One component.
Cured by atmospheric moisture.
Excellent adherence to most construction materials such as wood, concrete, roofing tiles, metal, aluminium (excluding polyethylene, silicone, and Teflon).
Insulates against sound and heat.
Cuttable and paintable when cured.
Excellent filling (expansion) capacity.

	Manuel	Gun
Chemical Base	Polyurethane	Polyurethane
Curing Mechanism	Atmospheric Moisture	Atmospheric Moisture
Specific Gravity	23±3 kg/m3 (ASTM D1622)	23±3 kg/m3 (ASTM D1622)
Tack Free Time	6 min. (ASTM C1620)	5-6 min. (ASTM C1620)
Cutting Time	15-30 min. (ASTM C1620)	15-30 min. (ASTM C1620)
Fire Class	B3 (DIN 4102-1)	B3 (DIN 4102-1)
Compression Strength	32,6 kPa (DIN 53421)	25 kPa (DIN 53421)
Tensile Strenghth	55,2 kPa (SO1926-79)	35,7 kPa (SO1926-79)
Yield	30-45 L (ASTM C1536)	30-45 L (ASTM C1536)
Dimensional Stability	-1,33 % (IS0 2796/86)	-0.29 % (IS0 2796/86)
Optimum Application Temperature	min. 20°C max. +25°C	min. 20°C max. +25°C
Temperature Resistance	-30°C to +80°C	-30°C to +80°C
Application Temperature	5°C to +35°C	5°C to +35°C

Colour: champagne

Packing: 12pcs in a carton

Application Temperature: +5 °C to +35 °C
The application surface must be solid, clean, dry and free of dust, oil and grease.
Surfaces must be moisturized before application of PU foam.
The most suitable tin temperature for use of PU foam is between 20–25°C.
Low temperature cans should be used after storage at room temperature for a period of time (20 min).
Shake the tube vigorously about 30 times before use.
Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates
Do not use in applications where continuous water immersion is possible.
Fresh foam can be cleaned with Foam Cleaner before curing. Cured foam can only be removed mechanically with knife or spatula.

What are you looking for?