Fast Curing PU Foam
Fast Curing PU Foam
Description:
Fast curing Adhesive foam is a special moisture curing based on polyurethane. It is specially formulated for bonding polystyrene sheets in thermally insulation of buildings. It is also used for structural elements in architectural jambs. It can be used as a first choice to fill or insulate the anomalies in the joining of different building materials. It can also be used for assembly of windows and doors.
Properties:
- Fast Curing
- Controlled expansion
- Strong Adhesion
- Thermal and acoustic properties
| PARAMETER | TEST METHOD | VALUES |
| Base | PU Polymer | |
| Curing | Moisture Curing | |
| Density | (ASTM D1622) | 18 kg/m3 |
| Tack – Free time (L1cm) | (ASTM C1620) | 2 min |
| Cutting Time (L 1cm) | (ASTM C1620) | 10 – 15 min |
| Fire Resistance after Crosslinking | B3 (DIN 4102-1) | |
| Compression Strength | (DIN 53421) | 17.38 kPa |
| Tensile Strength | (S01926-79) | 45.11 kPa |
| Color | Light Yellow | |
| Storage Condition | Min. 20oC max.+25oC | |
| Temperature Resistance | -30oC to +80oC | |
| Application Temperature | 5oC to 35oC |
Colors: Light Yellow
Packing:750 ML.x 12 Nos in a box
DOWNLOAD TECHNICAL DATA SHEET
APPLICATIONS
It is specifically used for sealing and bonding of various insulative or decorative building materials. Should be used by skillful applicators by fixing the panels in a short time by holding the spray point two centimeters away while the panel is fixed immediately upon applying the foam and pressed against the wall. Depending on the skills of the applicator, two to three panels should be fixed and aligned later. Excess foam if any, should be wiped off immediately with a spatula or a cutter.
